Unable To Find The Socket Transport "ssl"


Jan 10, 2007

Unable to find the socket transport "ssl" i am getting this error when i try to send mail through smtp.gmail.com? can anyone help me?

View 1 Replies


ADVERTISEMENT

Unable To Find The Socket Transport "http"

When I'm running the bit of code below, I get this message:

Quote: Unable to find the socket transport "http" - did you forget to enable it when you configured PHP?)

I wouldn't know how to troubleshoot this issue...

PHP Code:

$str = '';
$sock = fsockopen('http://www.site.com/', 80);
$req = "GET / HTTP/1.1

[code]....

View 6 Replies

Unable To Read From Socket [107]: Transport Endpoint Is Not Connected

My code is this but not working

<?php
$sock = socket_create(AF_INET, SOCK_STREAM, 0);
$sk = socket_connect($sock,"10.0.1.43","1234");
socket_set_nonblock($sock);..............

It display error: unable to read from socket [107]: Transport endpoint is not connected PHP Stack trace: Buffer = Last Error = 107Transport endpoint is not connected

View 2 Replies

Warning: Socket_connect() [function.socket-connect]: Unable To Connect [0]: A Socket Operation Was Attempted To An Unreachable Host

// Create a new socket
$sock = socket_create(AF_INET, SOCK_STREAM, SOL_TCP);
// An example list of IP addresses owned by the computer
$sourceips['kevin'] = '127.0.0.1';
$sourceips['madcoder'] = '127.0.0.2';
// Bind the source address
socket_bind($sock, $sourceips['madcoder']);
// Connect to destination address
socket_connect($sock, $sourceips['madcoder'], 80);.........

I am getting an error Warning: socket_connect() [function.socket-connect]: unable to connect [0]: A socket operation was attempted to an unreachable host. in C:wampwwwsockertsockert.php on line 13

View 3 Replies

Socket Transport "ssl" Not Enabled

I'm having trouble enabling the socket transport "ssl" in PHP. When I run my script, I get the error: Warning: fsockopen() function.fsockopen]: unable to connect to [URL]... (Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?) I'm running IIS6 on Windows and this is what I've done so far to try to get it working: uncommented the php_openssl.dll and php_sockets.dll extensions in php.ini made sure PHP was loading the ini file I made changes to (it is, and it's definitely loading other extensions, so I'm fairly sure this isn't the problem) made sure php_openssl.dll and php_sockets.dll were in the correct location copied ssleay32.dll and libeay32.dll to the main PHP folder, the WINDOWS folder and the WINDOWS/system32 folder made sure the Windows path variable included the location of PHP made sure the file permissions were correct on all the relevant files.

I've restarted IIS after pretty much every change, but I haven't had any luck. Is there anything obvious that I'm doing wrong? Is there anyway to troubleshoot this in smaller parts? (So I can figure out the problem by the process of elimination...?) Unfortunately Windows/IIS aren't my area of expertise--I've been put in charge because nobody else seems to know anything.

View 2 Replies

Google App - Gmail Unable To Set From - Gmail Replacing From Address When Sending Via Swiftmailer SMTP Transport

I'm using swiftmailer, SMTP transport method to send email from my PHP script. Sending the message is fine. It works. The problem is, no matter what I set the FROM,REPLYTO,SENDER settings to, The email comes through as the GMAIL mailbox (ME - me@[URL]) instead.

$transport = Swift_SmtpTransport::newInstance('imap.gmail.com', 465,'ssl')
->setUsername($login)
->setPassword($password)
;
$message = Swift_Message::newInstance($subject)
->setFrom(array('test@testdomain.com' => 'test mcttest'))
[Code]...

So the email goes through fine, but instead of being from [URL] as the sender... it's ME-me@[URL] I switch to a separate (non-gmail) SMTP server to test and the email went through fine, without any problems... definitely think it's a GMAIL thing.

View 1 Replies

Unable To Create Socket

I have PHP5.1.2 & Apache on my PC and I'm trying to connect PHP via a socket to a java app acting as a server. I'm failing at the first PHP hurdle. The following line returns

fatal error : Call to undefined function
socket_create() in <filename>.php
$socket = socket_create(AF_INET, SOCK_STREAM, SOL_TCP);

Configuration: Php.ini lines
default_socket_timeout = 60
extension=php_sockets.dll
extension_dir = "./"
; tried with "./ext" same result... so I coppied php_sockets.dll
to php5 root folder
enable_dl = On ;maybe not relevant

phpinfo()
The only socket related items I can find are
Registered Stream Socket Transports | tcp, udp
default_socket_timeout | 60

View 1 Replies

Socket Programming - Unable To Print The Information?

i'm new and trying to learn more about socket programming with php,i write a code with php that will connect to my pc at the port 80,in order to send [get /http /1.1] and then retrieve all the information back to me,but i can't get them to print it out,this is my code:

<?php
$host='192.168.0.1';
$port=80;
$q='get /http /1.1\r\n';[code]....

and yet there is another question:if we get all the information,how can we search for an specific word,like server,just get all about the server,and print it,

View 6 Replies

Unable To Open Socket Connections On Select Ports?

I wrote a PHP script that needs to connect to port 53 on UDP and on
some (shared) servers it doesn't seem to be working. This makes me
currious - is it possible that these servers connections on specific
ports has been disallowed? If so, how would one go about doing this?

Also, how might I go about detecting it?

View 1 Replies

Perl Socket Communication - Server Receives Command But Unable To Send It Back

So far I have written a Perl server that runs constantly in the background, when it receives inbound connections a process is forked and that then handles that one connection. What I ultimately want it to be able to do is accept inbound php connections through the socket of course run these commands and then relay and information back. So far I have managed to get this working 100% with a Perl scripted client but it doesn't work 100% with a php one. [Instead of pasting the hole wall of text here is the actual send and receive section.]

[code]...

As I said this works fine with a perl written client both locally and remotely but doesn't work 100% with php, what I mean by 100% is the fact that the server will recive the command but is unable to send it back, or the server is able to recive the command but the client isnt able to read the reply. Here is the client [php] that I have got working the most.

[code]...

View 1 Replies

Unable To Find A Provider With An API?

We are building a daily newsletter based on member preferences. The member can choose a city and some categories among a list of 10. Basically each email will be different. Each email is generated by our server. We are unable to find a provider with an API that can do that. Would you have any solution that ensure a 99% delivery.

View 3 Replies

Unable To Find Ini In XAMPP?

I downloaded a PHP script, copied at localhost and when I run it, it will not display all results instruction says that Globals should be off in PHP.ini and scripts should work while Globals are off.but I can't find php.ini in XAMPP. I tried

xampp/apache/bin but I didn't find php.ini

what should I do?

View 2 Replies

Unable To Find The Wrapper Https

I tried to include a php script that i downloaded to get me real time
money exchange rates, but it uses fopen() function and i get this
error:
Fatal error: fopen(): Unable to find the wrapper "https" - did you
forget to enable it when you configured PHP?

so i found out that IIS is the problem and i need PHP 4.3+ and
OpenSSL(which i don't understand what it is or how to get it)
I tried to setup Apache 2 on my windows and use it instead of IIS, and
i setup Apache to use port 8080, but when i access any page in /htdocs,
The IE tells me that the page can't be displayed.

I want to know how to configure apache and how to run php scripts from
it (ofcourse after i configure the httpd.conf file to use php).

View 2 Replies

Unable To Find Php_domxml.dll Error

I have just finishing installing apache and PHP4. It is claiming that
it cannot find the php_domxml.dll file giving me the following error
when I go to load a page with dom xml function on it:

Unknown(): Unable to load dynamic library
'C:/php/extensions/php_domxml.dll' - The specified module could not be
found

I am convinced that the paths are correct as I have the following line
in php.ini:

extension_dir = "C:phpextensions"

The file, php_domxml.dll, is defininetely in the extensions folder.

View 1 Replies

Unable To Find Includes/dbsettings?

Recently i configured Wordpress blog in IIS... I works fine. and Now i try configure the another package(PHP)... it loads the Index page when click on any link it says ** unable to find includes/dbsettings.php**But the file is there in the location and someone said there is problem in path mapping php.ini file....i not PHP Dev..Same package my friend installed works fine for him.

C:WordPressphpphp.ini
C:Program FilesPHPphp.ini
C:WINDOWSphp.ini

View 1 Replies

Unable To Find Line Breaks?

I have this feed of classifieds that I need to convert to an .xml doc. I explode each string into an array (separated by a "|"). Everything work just fine except the string cuts off if there are any line breaks in the 5th section and everything after the break is skipped over and I lose that information.I've tried things like prep_replace & str_replace (looking for things like

char(10) char(13) &#65533; x0B), striptags, nl2br. I can't find these breaks and destroy them.

I'm attaching part of the text file that I'm using. I've had it open in Notepad and seen small squares where the breaks are, but that's the only place I've seen that. The first line in the text file is a complete string with no breaks and how the ideal feed would look, after that it hasn't been adjusted.

View 9 Replies

Socket Programming - Send A Data (byte Array) To The Socket Server Using Client?

I have developed a socket server using C# and a client in PHP which connects fine .. i just need to send some data from the client to the server.

I developed the PHP socket client as according to this Past Stackoverflow Question

<?php
$host="127.0.0.1" ;
$port=9875;[code]...

Finally What i required is to send a data (byte array) to the socket server using this PHP client

View 3 Replies

Receive File Send By Client Socket Using Sever Socket

I want to save file send by client using PHP server socket. I am newbie to PHP socket programming.

View 1 Replies

Variable Scope - Unable To Find Explanation On The Document?

i'm confused about the php variable scope.
such as:

while(true){
$var = "yes , it is a test!";
}
printf($var)

the $var is defined in while statement scope , how could we get it outside it's scope ? and i can't find explanation on the document .i wonder how php deal with it's scope .

View 6 Replies

FPDF Error: Unable To Find Xref Table

I'm trying to generate a pdf file from html using dompdf0.6a and that works fine, but then i need to encrypt it for protection, but i get error

FPDF error: Unable to find xref table - Maybe a Problem with 'auto_detect_line_endings'

However if I use older dompdf versions it works fine. I guess it generates newer pdf version that fpdi doesn't support. btw. I traced it to FPDI/pdf_parser.php:208 (inside method pdf_read_xref())

View 2 Replies

Create Urlshortner But Unable To Find The Required Output?

I have created url shortner by using the link http:[url].....for this i am using EasyPhp5.3.6.0,,but i am not finding the required output,,that means after clicking shortened url it is not redirecting to the original page.Possibly i am thinking the issue is on database side.This is the steps which i did in database side.

First i went to Configuration->PhpMyAdmin link ,,Then i created Database named "leaf" here i didnt selected 'Collation' named dropdown i made table name as "team" with number of fields as "3" then i modified fields like shown below

**Field id url shortened**
Type INT VARCHAR VARCHAR

Lenght/Values 255 10000 10000
Default None None None

Then i made 'id' as Primary Key.These are some part of php code where database handling going one
in sortner.php

$con = mysql_connect("localhost","root","");
if (!$con)
{ [code]......

My all files are under root folder(www) that means C:Program FilesEasyPHP-5.3.6.0www est

View 2 Replies

MongoDB - Socket.io Better Than MySQL + Socket.io For A Real Time App?

I am building a real-time app & am wondering if I should bother moving from MySQL to MongoDB. My app has a ton of writes happening, though the read cases are higher still. Am currently using XHR on the client-server side but am almost done moving to Socket.io too. My research does make me want to move to MongoDB + Socket.io, but wanted to get some thoughts from the community.

update I am currently defining 'better' by a faster app, if that makes any sense. I am sort of able to live without sql, I 'think'. Currently using 0 JOINs etc. But I was trying to see if anybody out there had any experience moving from MySQL to MongoDB for a 'generic' real-time app.

View 1 Replies

Fput Function (Warning: Unable To Find File Identifier 0 In)

I made a script for logging the emails that they send on my site. It works fine on windows 98 version, but when I upload it to a Linux computer it fails. Here are the first lines of the script:

$file = fopen("log/index.html", "a+");
$today = date("G:i, l jS Y");
if ($argv[0] == "contact"){
if ($name == ""){
fputs($file, "Text comes here";
fclose$file);}

Then the output is:

Warning: fopen("log/index.html","a+") - Permission denied in /home/jonathan/public_html/beftubbies/email.php3 on line 3

Warning: Unable to find file identifier 0 in /home/jonathan/public_html/beftubbies/email.php3 on line 30

View 4 Replies

Transport File To Different Server?

Im running a file host thats grown beyond the capacity of a single server, and I need to implement multiple server storage of files. I'd like to do this as cheap as possible, so those fancy mass storage methods are out of the question. I simply want to move a file thats uploaded by the user to the "gateway" server, which hosts all the http and mysql, to one of the media servers. It can either be done at the end of the user's request, or via cron every couple of minutes. At this point the only method Im truly familiar with, is using ftp_put php function, and simply ftping the file to a different server, but I've had problems with this method in the past, especially for larger files, and a lot of the files that will be getting transferred will be over 100mb. Preferably Im looking for a purely software solution. hopefully nothing more than a php/bash script.

View 3 Replies

Tcp - RPC - Agnostic To Transport Mechanism?

For a recent project, I have a PHP script running as a CLI-based daemon. This daemon will be responsible for monitoring/controlling independent worker processes.Periodically, users will issue requests to manage workers through a PHP web front-end (CLI daemon and front-end code are on the same physical server). The front-end will need to make method calls to the daemon.I'm confus about how to handle these "remote" method calls. I thought that using a RPC protocol such as JSON-RPC over a standard UNIX or TCP socket would be the way to go, but every implementation of JSON-RPC, XML-RPC, SOAP, etc. for PHP seems to be tightly coupled to HTTP. Since I'm not communicating over the web, HTTP is completely unnecessary.

View 2 Replies

Enabling SSL Transport On IIS - Web Servers & Hosting?

how to Enabling SSL Transport in PHP on IIS

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved